Mining Flameproof Sewage Submersible Pump

About Mining Flameproof Sewage Submersible Pump

I Overview

The series of submersible pumps for wells are suitable for extracting groundwater from deep wells, and can also be used for water lifting projects such as rivers, reservoirs and canals. It is mainly used for irrigation of farmland and water for people and animals in mountainous areas, and also for drainage in cities, factories, railways, mines and construction sites.

Features:.

1.The motor and the water pump are integrated, and it is safe and reliable to run under water.

2.There is no special requirement for well pipes, as long as the water pipes can bear the corresponding pressure.

3.The installation, use and maintenance are convenient and simple, and the pump needs small space, so there is no need to build a pump room.

4. Simple structure, saving raw materials.

II Operating environment and working conditions:

1. the power frequency is 50Hz and the rated voltage is 180V.

2. The solid content is less than 0.01%

3. The pH of the pumped liquid is 6.5-8.5.

4. The temperature of the conducting medium shall not exceed 20 degrees.

5. The inlet and outlet of the pump must be below the dynamic water level of 1m, but the surbmerging shall not exceed 70m below the static water level, and the bottom of the motor shall be at least 1m away from the bottom of the well.

6. The well shall be upright and the well wall be smooth, and the pipes shall not be staggered.